-Bottom mounted self adjusting lipo mount or top mounted strap or rubber band hook
-CF are cut along the weave
-Top plates accept 20x20 stack perfect for HD camera setup
-Props are 6mm away from the frame body to eliminate propwash
-Supports EOS and HD camera , AIO mount will be added soon
-Support for up to 3.2" props (65mm for 75x/pro2/m7 whoop stack)
Designed for 65mm and 3" props
9mm motor hole pattern (11xx)
130 size Micro
Weight: 12g. CF only , 18g. with hardware
2mm CF arms thats cut along the weave
2mm CF bottom plate
1.5mm CF top plate
TPU printed parts
Knurled aluminum standoffs and metal screws
WHAT COMES WITH THE KIT?
2Pc. CF arms
1pc. CF bottom plate
1pc. CF top plate
1pc. 3D printed lipo strap
2set Camera mount for HD and non HD
Set of mounting hardware
Optional: bottom mounted 3D printed self adjusting lipo holder for 350~450mah lipo
When building using the Whoop stack with only 6A ESC like the one on the 75x,M7 and Trashcan , use only a lower KV 1102/03 motors
Beta85x stack with 16A ESC can use bigger T-mount 2.5~3" props, higher KV motors and can use up to 3S lipo.
The 20x20 mouting holes on the top plate is used to mount the HD controller board if using the whoop FC/ESC stack.
Arms are stackable meaning you can double the arms for a total of 4mm thickness if you are planning build a more powerful and heavier micro racer.
20mm and 25mm standoffs will be offered. 25mm is perfect for HD build and 20mm for non HD EOS cam.
Free to Download 3D Printed parts:
Axii / R9 antenna mount