Skip to main content

Carrera Direct Conversion Frame Kit V2

Carrera Direct Conversion Frame Kit V2

  • Availability: In Stock
  • $21.95
  • Choose Options
    Please Select
    Please Select
    Please Select
  • Bookmark and Share

Limited Offer:

Order the Carrera and receive  4pcs Motor Guards/softmount for free!

 

Carrera

 

 

Direct conversion kit for Mobula 7 , Pro2 and Trashcan

Whats New:

V2 

- Now includes a self adjusting 2S Lipo mount (350~450)

- More rigid arms 

- Redesigned motor mounts  for a more aggressive design (see pic)

- Direct conversion kit for Sailfly S and Mobula 7 using the AIO pod

 

Features:

2mm full carbon fiber main plate that is cut along the weave for a more stronger and rigid arms

Designed for the 65mm propellers , flies great too on 56mm props 

AIO camera and  stack are directly mounted on the  TPU pod and not on the CF frame eliminating jellow and gyro issues. 

Front hinge pod mount for easy removal and repair

Only 3 screws needed to complete the build (included)

No soldering or cutting needed

Complete the conversion in less than 30min.

Thicker 1.3mm TPU flexible pod 

Fully protected camera lens with fixed tilt of 30 or 40 degree angle on EOS pod version and an adjustable tilt on EOS Pod version

FC stack  is mounted on the pod and not on the main plate isolating it from vibration (AIO version only)

Fully accessible  micro usb port  and a access hole for changing the VTX channel

Although it was intended for the 0802 motors it still have a mount for 11xx motors 

Easy swap frame and will be offering different design in the future.

Comes with 2 Battery holder  for 2x 250mah 1S and  350mah 2S (beta75x)

EOS Pod version comes

 

 

Specification:

2mm 3K  carbon fiber with cut along the weave

3D Printed flexible TPU pod

Motor mount for the M7 0802 motors 

Motor mount for 11xx motors 

 

Included with the kit:

 

M7 AIO AIO direct Conversion Kit:

1pc. 1.3mm thick TPU pod

1pc. TPU FC stack holder

1pc. CF main plate

1pc. Lipo mount for for 2x 250mah 1s for 2s output 

1pc. Lipo mount for 350mah 2s (beta75x)

12pc. M1.4 motor screws

Set of mounting hardware

 

M7/Trashcan/Pro2  EOS Pod kit.

1pc. 1.3mm thick TPU pod

1pc. Whoop FC stack holder

1pc. VTX holder for the upgraded half stack vtx 

1pc. CF main plate

1pc. Lipo mount for for 2x 250mah 1s 

1pc. Lipo mount for 350mah 2s (beta75x)

12pc. M1.4 motor screws

Set of Mounting hardware

 

Recommended Parts:

- Designed to fit all the components from your Mobula7 or:

- Crazybee F4 Whoop size flight controller

- 25mw AIO camera with 14x14 dimension (must have the same size as the M7 aio camera)

- 0802 16000KV motors with jst plug 

- 65mm Propellers with 1mm center hole (Brand: Kingkong)

- much better if you upgrade to XT30 lipo plug to reduce sagging 

- 300mah 2s lipo similar to the beta75x

- EOS1/2 camera  if using the  EOS Pod 

 

Build note:

CLICK HERE : CARRERA BUILD GUIDE  

- Because it's a direct conversion kit you will just need to transfer all your electronics to the new frame and you are good to go.

- There are mounting holes to accept 11xx motors but you might need to extend the wires.

- Pinch or squish  the pod from top and bottom then insert the AIO camera carefull not to damage the wires.

- Lipo holster is pressure fitted  to the CF frame so you will need to squish the lipo mount and isert it on the main plates center hole, use a screw driver to help you pull the mount in place. 

- Use a rubberband  to hold non standard size lipos

- as tested weight of only 34g without lipo and 47g with 2s lipo

 

Free to download 3D printed parts:

 Carrera Motor Guards /Softmouts

 

Build Videos:

EOS Version

 

Flight and Review Videos

BUILD VIDEO

https://www.youtube.com/watch?v=YBcOz4bDqHs&fbclid=IwAR35Odl8xsl4IRO5YwaIhNUYlhHuLk3564FxU7tCP940yb3hppyumh1KKTc

 

https://www.youtube.com/watch?v=-Bw1Q_zkWDI&feature=youtu.be&fbclid=IwAR2mz2l8sJevslulsCSnHO2nwC8ZQqbYVUS5TCOoeMGYg98dqlHa6vkwYhA

 

 

Note: Picture shown are for illustration purposes only. Some parts might not be included with the kit. Please check product description for more details.  

 

 

 

 

 

Write your comment
Enter the code in the box below: